The LiLLY LED phototherapy lamp is designed for neonatal hyperbilirubinemia treatment. Its LED technology provides intensive light radiation within the 440–470 nm spectrum to reduce bilirubin concentration, combining treatment effectiveness, economical operation and a long radiator life.
Key Features
- LED technology with minimum radiator life of 60,000 operating hours.
- Adjustable stand with stepless height control using an internal gas support and positioning pedal.
- Temperature sensor with adjustable alarm limits attached to the patient’s body to help prevent overheating.
- Dual use: can be attached to an incubator cover or suspended on the stand over an infant bed or warming bed.
- Examination light set to daylight for correct identification of infant skin colour.
- Flexible positioning through joint suspension in all directions.
- Manual mode with adjustable light intensity and treatment time counter.
- Therapeutic mode with selectable, changeable and storable programmes, each consisting of three treatment sequences.
- Automatic radiation-intensity regulation according to the distance between the radiator and patient.
- Continuous function monitoring, LED lifetime measurement and alarms for failures, power failure, radiation-intensity changes or servicing.
Technical Specifications
- Type designation: FTL-620 LiLLY
- Power voltage: 110–230 V, 50/60 Hz
- Maximum input power: 100 VA
- Dimensions without stand: height 119 mm, length 588 mm, width 244 mm
- Weight without stand: 5 kg
- Dominant wavelength: 460–480 nm
- LED life: minimum 60,000 hours of operation
- Radiated area: 615 × 480 mm at a distance of 500 mm / 720 mm
- Manual mode: regular mode 30 µW/cm²·nm; intensive mode >60 µW/cm²·nm; application-time measurement
- Therapeutic mode: intensity adjustment range 10–60 µW/cm²·nm, in 5 µW/cm²·nm increments
- Radiant warmer mode: intensity 35 µW/cm²·nm at a distance of 720 mm
- Body temperature measurement: 20–45 °C
- Measurement range: ±0.3 °C
- Alarms: patient overheating protection
Optional Accessories
- Adjustable stand, height 1200–1550 mm
- Stand dimensions: width 750 mm, length 707 mm
- Continuous radiator positioning in all axes up to 35°
